3. Control Panel
1. LED:
POWER
On
Power on
DMX
On
DMX input present
2. Display:
To show the various menus and the selected function
3. Button:
MENU
To enter into move backward or leave the menu
UP
To go backward to move up in the menu
DOWN
To go forward to move down in the menu
ENTER
To perform the desired functions
4. DMX IN:
For DMX512 link, use 3/5-pin XLR cable to link the unit and DMX controller
5. DMX OUT:
For DMX512 link, use 3/5-pin XLR cable to link the next units
6. ETHERNET:
Transfers fixture’s information to a main controller
7. POWER IN:
Connects to supply power
8. POWER OUT:
Connects to the next fixture
9. FUSE(T 15A):
Protects the unit from damage of over current
4. How To Set The Unit
4.1 Main Function
Turn on the unit, press the
MENU
button into menu mode, and press the
UP
/
DOWN
button until
the required function is shown on the monitor. Select the function by the
ENTER
button. Use the
UP
/
DOWN
button to choose the submenu, press the
ENTER
button to store and automatically
return to the last menu. Press the
MENU
button or let the unit idle 30 seconds to exit menu mode.
The main functions are shown below:
6H
