6
GB
• Slither the remover back and forth on flat clothing
• Cover the guard cap after using.
• Don’t use it on silk stockings, otherwise it will be damaged.
Cleaning and Maintenance (Picture 3):
1. Turn off switch
2. Screw off storage cover according to the graphic direction
3. Screw off fabric guard according to the graphic direction
4. Take out inner blade
5. Use small brush to clean fuzz in the remover.
6. Assemble all parts in reverse order.
Caution
•
Take care your hands to avoid injury when take down the inner
• Don’t press on blade net
•
Use dry cloth to clean the Lint remover
•
Screw off storage cover only when cleaning
•
Clean storage cover when 80 percent is full.
•
Clean the centre of blade and inside of blade net in time for blade run unhinderedly.
Charging (Picture 4):
1. Before start charging, ensure the switch has been turned off
2. Inserting plugs into AC outlet correctly
3. Charging time usually needs about eight hours
4. Charging 12 hours continuously when it is firstly used or a long time for not being used. But
don’t charge for more than 24 hours continuously
Summary of Contents for RA100
Page 1: ...1 Model RA100 lint remover ...
Page 3: ...3 ...
Page 4: ...4 ...
Page 36: ...Model RA100 lint remover ...
