ACME Pageant CM-200Z, User Manual

Page: 11 / 20

10A
Manual Test
Select Manual Test, press the ENTER button to confirm, present mode will blink on the display.
Use the DOWN and UP button to select the Pan / Tilt / Red / Green / Blue / White /Zoom /
Dimmer or Strobe. Once you find a function or a color you wish to test, press the ENTER
button, use the DOWN and UP button to adjust the values (0~255). Once finished the test,
press the ENTER button to save, go back to the functions without any change press the MENU
button again. Hold and press the MENU button about one second or wait for one minute to
exit the menu mode.
Auto Test
Select Auto Test, press the ENTER button and the unit will run self-test by built-in program. To
go back to the functions press the MENU button again. Hold and press the MENU button
about one second or wait for one minute to exit the menu mode.
Temp.
Select Temp., press the ENTER button and the display will show the temperature of the unit.
To go back to the functions press the MENU button again. Hold and press the MENU button
about one second or wait for one minute to exit the menu mode.
Fixture Time
Select Fixture Time, press the ENTER button and the display will show the number of working
hours of the unit. To go back to the functions press the MENU button again. Hold and press
the MENU button about one second or wait for one minute to exit the menu mode.
Firmware Version
Select Firmware version, press the ENTER button and the display will show the version of
software of the unit. To go back to the functions press the MENU button again. Hold and
press the MENU button about one second or wait for one minute to exit the menu mode.