ACME PAGEANT 300ZR II, User Manual, Page: 16 / 28

In the main functions, hold the ENTER button for at least 3 seconds into offset mode, use the
DOWN / UP button up to select Pan , Tilt or Zoom , and press the ENTER button to confirm. Use the
DOWN / UP button to adjust the home position of the Pan, Tilt or Zoom, Once the position has
been selected, press the
ENTER
button to setup, to go back to the functions without any change
press the MENU button again. Press and hold the MENU button about one second or wait for
about one minute to exit the menu mode.
4. Control By Universal DMX Controller
4.1 DMX 512 Connection
1. If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable.
2. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W
resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the
DMX-output of the last unit.
15G