ACME O2 Oxygen User Manual Download | Manualshive

Page: 7 / 32

background image

3. Control Panel

1. Display:

To show the various menus and the selected function

2. Button:

MENU

To enter into move backward or leave the menu

UP

To go backward to move up in the menu

DOWN

To go forward to move down in the menu

ENTER

To perform the desired functions

3. POWER OUT:

To connect to the next fixture

4. POWER IN:

To connect to supply power

5. DMX IN:

For DMX512 link, use 3-pin XLR cable to link the unit and DMX controller (5-pin XLR is optional)

6. FIRMWARE UPGRADE:

Used to upgrade fixture’s firmware

7. DMX OUT:

For DMX512 link, use 3-pin XLR cable to link the next units (5-pin XLR is optional)

4. How To Set The Unit
4.1 Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until
the required function is shown on the monitor. Select the function by pressing the ENTER button.
Use the UP/DOWN button to choose the submenu, press the ENTER button to store and
automatically return to the last menu. Press the MENU button or let the unit idle 30 seconds to exit
menu mode.
The main functions are shown below:

6G

«
...
5
6
7
8
9
...
»

Summary of Contents for O2 Oxygen

































Reviews:

No comments

Related manuals for O2 Oxygen

Brand: SALUDA MEDICAL Pages: 61

Brand: Velocitek Pages: 81

ABS-Lock X-Flat

Brand: ABS Pages: 8

ABS-Lock X-DURCH

Brand: ABS Pages: 8

Brand: ABS Pages: 8

Brand: Ace Pages: 17

Brand: ACE INSTRUMENTS Pages: 33

Brand: ACE INSTRUMENTS Pages: 2

Brand: ACE INSTRUMENTS Pages: 2

Brand: TapFlo Pages: 35

Brand: DANA Pages: 8

Brand: 2E Pages: 6

Precision2 HP2 Series

Brand: B-K lighting Pages: 6

Brand: Zero Hand Truck Pages: 38

Brand: B-K lighting Pages: 3

FreeStyle Comfort

Brand: CAIRE Pages: 33

Brand: Quivogne Pages: 13

Brand: Olympus Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands