ACME LP-1600 BD30, User Manual, Page: 9 / 16

8A
Once select, press ENTER button to setup or automatically exit menu mode without any
change after 8 seconds. To go back to the functions without any change press the MENU
button.
Dimmer curve
Press the MENU button up to when the is shown on the display
，
Pressing ENTER
button and the present mode will blink. Use DOWN and UP button to select
the (dimmer mode 1) or (dimmer mode 2) or (dimmer mode 3) or
(dimmer mode 4). Once select, press ENTER button to setup or automatically exit
menu mode without any change after 8 seconds. To go back to the functions without any
change press the MENU button.
Optically Linear: The increase in light intensity appears to be linear as DMX value is
increased.
Square Law: Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law: Light intensity control is coarser at low levels and finger at high levels.
S-curve: Light intensity control is finger at low levels and high levels and coarser at medium
levels.
LED display
Press the MENU button up to when the is shown on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select (display on) or
(display off) mode. Once select, press ENTER button to setup or exit menu mode
without any change after 8 seconds. Back to the functions without any change press MENU
button again.