Check if the gobo wheel2 Hall elements is in poor contact with the lead of the PCB board or
disconnected.
Check if the gobo wheel2 motor is damaged.
Check if there is any damage to the circuit of the gobo wheel2 motor drive board.
10. Prism1/RPrism1 Reset Fail
Check if the position of the Prism1 mounting magnetic steel falls off or is damaged.
Check if there are other interference items in the Prism1 operating range.
Check if the Prism1 Hall elements is damaged.
Check if the Prism1 Hall elements is in poor contact with the lead of the PCB board or
disconnected.
Check if the Prism1 motor is damaged.
Check if there is any damage to the circuit of the Prism1 motor drive board.
11. Prism2/RPrism2 Reset Fail
Check if the position of the Prism2 mounting magnetic steel falls off or is damaged.
Check if there are other interference items in the Prism2 operating range.
Check if the Prism2 Hall elements is damaged.
Check if the Prism2 Hall elements is in poor contact with the lead of the PCB board or
disconnected.
Check if the Prism2 motor is damaged.
Check if there is any damage to the circuit of the Prism2 motor drive board.
12. Focus Reset Fail
Check if the position of the focus mounting magnetic steel falls off or is damaged.
Check if there are other interference items in the focus operating range.
Check if the focus Hall elements is damaged.
Check if the focus Hall elements is in poor contact with the lead of the PCB board or disconnected.
Check if the focus motor is damaged.
Check if there is any damage to the circuit of the focus motor drive board.
13. Zoom Reset Fail
Check if the position of the zoom mounting magnetic steel falls off or is damaged.
Check if there are other interference items in the zoom operating range.
Check if the zoom Hall elements is damaged.
Check if the zoom Hall elements is in poor contact with the lead of the PCB board or disconnected.
32E
Summary of Contents for Libre
Page 1: ......
Page 12: ...11E ...
