Show Mode
Press the MENU button up to when the
is showing on the display. Pressing ENTER button
and the display will blink. Use DOWN and UP button to select the
(Random show),
(show 1) or
(show 2). Once the mode has been selected, press the ENTER button to setup
or automatically return to the main functions without any change after one minute. To go back to
the functions without any change press the MENU button again.
Slave Mode
Press the MENU button up to when the
is showing on the display. Pressing ENTER button
and the display will blink. Use DOWN and UP button to select the
(set the fixture as
master) ,
(set the fixture as slave 1) or
(set the fixture as slave 2). Once the mode
has been selected, press the ENTER button to setup or automatically return to the main functions
without any change after one minute. To go back to the functions without any change press the
MENU button again.
Display Inverse
Press MENU button until
is blinking on the display. Use DOWN and UP button to select
(display normal) or
(display inverse), press ENTER button to setup.
LED display
Press the MENU button up to when the
is shown on the display. Pressing ENTER button
and the display will blink. Use DOWN and UP button to select
(display always on) or
(display off 20 seconds after exit menu) mode. Once select, press ENTER button to setup or
exit menu mode without any change after one minute. Back to the functions without any change
press MENU button again.
Manual setting color
8B
