ACME Led Move 700PE, User Manual

Page: 11 / 28

10C
Show Settings
Enter menu mode, select Show Settings , press ENTER button to confirm, use UP/DOWN button
to select Offline Mode , Show Mode , Slave Mode , Focus 1 , Focus 2 , Sound Trigger or Sound
Sensitivity .
Offline Mode
Select Offline Mode , press ENTER button to confirm, present mode will blink on the display,
use UP/DOWN button to select M/S (Master/ Slave Show), Hold or Blackout , once selected,
press ENTER button to store. Press MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Show Mode
Select Show Mode , press ENTER button to confirm, present mode will blink on the display,
use UP/DOWN button to select Show 1 , Show 2 , Show 3 or Show4 , press ENTER button to
store. Press MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
Slave Mode
Select Slave Mode , press ENTER button to confirm, present mode will blink on the display,
press UP/DOWN button to select Slave 1 or Slave 2 , press ENTER button to store. Press
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Focus 1
Select Focus 1 , press ENTER button to confirm, present mode will blink on the display, use
UP/DOWN button to adjust the value from 0 to 255, press ENTER button to store. Press
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Focus 2
Select Focus 2 , press ENTER button to confirm, present mode will blink on the display, use
UP/DOWN button to adjust the value from 0 to 255, press ENTER button to store. Press
MENU button back to the last menu or let the unit idle one minute to exit menu mode.