ACME LED-LP400, User Manual

Page: 4 / 16

3A
Direct sunlight can cause heat to build up inside of the unit, which will seriously damage
unit.
2. Technical Specifications
y
It can be operated by DMX512 control or can be used as an individual unit without
controller.
y
It can be linked together as many as required in master/slave mode, and perform the great
built-in programmed lighting shows triggered by music.
y
Please use a 3 pin XLR cable/plug when connecting them together.
y
It features different pre-programmed chase patterns.
y
2/3 Channel modes.
y
Voltage: AC 100V-240V,50/60Hz
y
LED: 400pcs
y
Power consumption
濐
26W
y
Fuse: T 6.3A
y
Dimension
Κ
406 x 356 x 114mm
y
Weight
濐
6.2KG
3. Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is
firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure
to which you are attaching the unit is secure and is able to support a weight of 10 times of the
unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the unit
when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of
the touch of people and has no one pass by or under it.
For 230V 50Hz power supply, maximum fixtures that can be connected on one power cable is 20;
For 120V 60Hz power supply, maximum fixtures that can be connected on one power cable is 12;