ACME LED-192RGB User Manual Download

Page: 3 / 6

change the mode. Once the required mode has been selected, press

ENTER

button to

setup or it will automatically return to the main functions without any change after idling 10

seconds. Back to the functions without any change press

MENU

button. The main functions

are shown below:

DMX 512 Address Setting

Press the

MENU

button up to when the

is shown on the display. Pressing

ENTER

button and the display will blink. Use

DOWN

and

button to change the DMX 512 address.

Once the address has been selected, press

ENTER

button to setup or automatically return

to the main functions without any change after 10 seconds. Back to the previous functions

without any change press

MENU

button.

Slave Mode

Press the

MENU

button up to when the

is shown on the display. Pressing

ENTER

button, Use

DOWN

and

button to select the

(Slave Mode Normal, 1, 2, 3, and 4). press

ENTER

button to setup or automatically

return to the main functions without any change after 10 seconds. Back to the previous

functions without any change press

MENU

button.

Color Mode

Press the

MENU

button up to when the

is shown on the display. Use

DOWN

and

button to select the

. press

ENTER

button to setup or automatically

return to the main functions without any change after 10 seconds. Back to the previous

functions without any change press

MENU

button.

Dimmer Setting

Press the

MENU

button up to when the

is shown on the display. Pressing

ENTER

button and the display will blink. Use

DOWN

and

button to change the lighteness, Once

selected, press

ENTER

button to setup or automatically return to the main functions without

any change after 10 seconds. Back to the previous functions without any change press

MENU

button.

Strobe Setting

Press the

MENU

button up to when the

is shown on the display. Pressing

ENTER

button and the display will blink. Use

DOWN

and

button to change the strobe, Once

selected, press

ENTER

button to setup or automatically return to the main functions without

any change after 10 seconds. Back to the previous functions without any change press

MENU

button.

Blackout Mode

Press the

MENU

button up to when the

is shown on the display. Use

DOWN

and

button to select the “Yes” or “No” Blackout, Back to the previous functions without any

change press

MENU

button.

LED

Press the

MENU

button up to when the

is shown on the display. Pressing

ENTER

button and the display will blink. Use

DOWN

and

button to select the “ON” or “OFF”

mode. Once the mode has been selected, press

ENTER

button to setup or automatically

Summary of Contents for LED-192RGB







Search results

Summary of Contents for LED-192RGB

Reviews:

Related manuals for LED-192RGB

Brands by name

Popular brands

ACME LED-192RGB, User Manual

Search results

Summary of Contents for LED-192RGB

Reviews:

Related manuals for LED-192RGB

Brands by name

Popular brands