ACME IM-250 SP, User Manual, Page: 4 / 27

3A
Warning

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.

Never touch bulb with bare fingers, as it is very hot after using.

Hot lamp explosion hazard. Do not open the unit within five minutes after switching off.

Do not start on the unit without bulb enclosure or when housing is damaged.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged.

Do not look directly at the light while the bulb is on.
Caution
There are no user serviceable parts inside the unit. Do not open the housing or attempt any
repairs by yourself. In the unlikely event your unit may require service, please contact your
nearest dealer.
Installation
The unit should be mounted via its mounting system ( as shown below ) on the bottom of the
base. Use clamps to fix the unit to truss. Always ensure that the unit is firmly fixed to avoid
vibration and slipping while operating. Always ensure that the structure to which you are
attaching the unit is secure and is able to support a weight of 50 kg for each unit.