3. Button:
MENU
To enter into move backward or leave the menu
DOWN
To go forward in the selected functions
UP
To go backward in the selected functions
ENTER
To confirm the selected functions
4. DMX IN:
For DMX512 link, use 3/5-pin XLR cable to link the unit and the DMX controller
5. DMX OUT:
For DMX512 link, use 3/5-pin XLR cable to link the next units
6. POWERCON IN:
To connect to supply power
7. POWERCON OUT:
To connect to the next fixture
8. FUSE(T 10A):
Protects the unit from damage of over-voltage or short circuit
3.2 Main Function
Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until
the required function is shown on the monitor. Select the function by pressing the ENTER button.
Use the UP/DOWN button to choose the submenu, press the ENTER button to store and
automatically return to the last menu. Press the MENU button or let the unit idle 30 seconds to exit
menu mode.
The main functions are shown below:
6C
