ACME HD220I, User Manual, Page: 7 / 77

7
GB
sections. Place a large round brush at the root of one of the sections.
•
Point the hair dryer with the concentrator at a 90-degree angle to the section and run the brush under it,
beginning at the roots and working down to the tips. Your hair dryer should now be set at medium. Repeat
the process several times to dry the section completely before moving on to the next section.
•
Finish by turning the ends under.
Cleaning
1. Unplug the appliance before clean it.
2. Remove the attachments from the appliance before you clean them.
3. Clean the appliance with dry cloth.
4. Clean the attachments with wet cloth or wash it with water.
5. Wait until dry before you use or store them.
Troubleshooting
My dryer doesn’t work
•
Check the socket to which dryer is connected. It is possible that socket is dead. Try to connect another
appliance to this socket to find out.
•
If the dryer automatically switched itself off in drying process it may have overheated. Unplug the dryer from
power socket and let it cool down for a few minutes. Clean the holes and the grilles of the dryer if it’s blocked
by hair or something like that and try to switch on appliance again.
•
The power cord of the dryer can by damaged. Unplug the dryer from power socket and check it carefully. If it
is damaged, you must give it to replace by authorized service.
Waste Electrical and Electronic Equipment (WEEE) Symbol
The use of the WEEE symbol indicates that this product may not be treated as household waste. By
ensuring this product is disposed of correctly, you will help protect contact your local authority, your
household waste disposal service provider or the shop where you purchased the product.