3. DMX IN:
DMX512 link, use 3/5-pin XLR cable to link the unit and the DMX controller
4. DMX OUT:
DMX512 link, use 3/5-pin XLR cable to link the next unit and output DMX signal
5. POWER SWITCH:
Turns on/off the power
6. Fuse(T 15A):
Protects the unit from over-voltage or short circuit
7. POWER:
To connect to supply power
3.2 Main Function
Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until
the required function is shown on the monitor. Select the function by the ENTER button. Use the
UP/DOWN button to choose the submenu, press the ENTER button to store and automatically
return to the last menu. Press the MENU button or let the unit idle one minute to exit menu mode.
The main functions are shown below:
6E
