menu mode after auto test.
Manual Test
To select Manual Test, press the ENTER button to confirm. Use the UP/DOWN button to select
channel, and adjust the channel value. Once selected, press the ENTER button to setup, the fixture
will run as the channel value indicates. Press the MENU button back to the last menu or exit menu
mode let the unit idle one minute.
(All channels value will become 0 after exiting Manual Test menu)
Fixture Information
Enter MENU mode, select Fixture Information, press the ENTER button to confirm, use the
UP/DOWN button to select Fixture use time or Firmware Version.
Fixture use time
To select Fixture use time, press the ENTER button to confirm, the fixture working hours will show
on the display. Press the MENU button to exit.
Firmware Version
To select Firmware Version, press the ENTER button to confirm, the fixture software version will
show on the display. Press the MENU button to exit.
Reset Functions
Enter MENU mode, select Reset Functions, press the ENTER button to confirm, use the UP/DOWN
button to select Pan/Tilt, Zoom or All.
Pan/Tilt
To Select Pan/Tilt, press the ENTER button to confirm. Use the UP/DOWN button to select No or
Yes (the unit will run built-in program to reset pan and tilt to their home positions), press the
ENTER button to store. Press the MENU button to exit menu mode.
Zoom
To select Zoom, press the ENTER button to confirm. Use the UP/DOWN button to select No or Yes
(the unit will run built-in program to reset zoom to its home positions), press the ENTER button to
store. Press the MENU button to exit menu mode.
12H
