ACME GENESIS MOVE, User Manual, Page: 5 / 17

4E
3. How To Set The Unit
3.1 Control panel
Display
To show the various menus and the selected functions
LED
DMX On DMX input present
MASTER On Master Mode
SLAVE On Slave Mode
SOUND Flashing Sound activation
Button
MENU To select the programming functions
DOWN To go backward in the selected functions
UP To go forward in the selected functions
ENTER To confirm the selected functions
Only for remote control
Connecting with CA-8/CA-9/CA-9RTX to control the unit for Stand by, Function and Mode function.
Mains input
Connect to power supply.
DMX input/output
For DMX512 link, use 3/5-pin XLR cable to link the unit together.
3.2 Main Function
To select any of the given functions, press the
MENU
button up to when the required one is showing on the
display. Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to
change the mode. Once the required mode has been selected, press the
ENTER
button to setup, to go
back to the functions without any change press the
MENU
button again. Hold and press the
MENU
button
about one second or wait for one minute to exit the menu mode.
The main functions are showing below: