1. DISPLAY:
To show the various menus and the selected function
2. Button:
MENU
To enter into move backward or leave the menu
UP
To go backward to move up in the menu
DOWN
To go forward to move down in the menu
ENTER
To perform the desired functions
3. POWER IN(POWERCON Version):
To connect to supply power
4. POWER OUT(POWERCON Version):
To connect to the next fixture
5. DMX IN:
DMX512 link, use 3-pin XLR cable to link the unit and DMX controller (5-pin XLR is optional)
6. DMX OUT:
DMX 512 operation, use 3-pin XLR cable to link the next units (5-pin XLR is optional)
4. How To Set The Unit
4.1 Main Function
Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until
the required function is shown on the monitor. Select the function by the ENTER button. Use the
UP/DOWN button to choose the submenu, press the ENTER button to store and automatically
return to the last menu. Press the MENU button or let the unit idle One Minute
to exit menu mode.
The main functions are shown below:
6
B
