Mode 1(Optically Linear):
The increase in light intensity appears to be linear as DMX value is increased.
Mode 2(Square Law):
Light intensity control is finer at low levels and coarser at high levels.
Mode 3(Inverse Square Law):
Light intensity control is coarser at low levels and finger at high levels.
Mode 4(S-cure):
Light intensity control is finger at low levels and high levels and coarser at medium levels.
Slave Mode
To select the
Slave Mode
, press the
ENTER
button to show
SLAVE MODE
on the display. Use the
DOWN
/
UP
button to select the
Master
or
Slave
modes.
Once the mode has been selected, press
the
ENTER
button to setup, to go back to the functions without any changes press the
MENU
button again. Hold and press the
MENU
button for one second or wait for one minute to exit the
menu mode.
Black Out
To select the
Black Out
, press the
ENTER
button to show
BALCKOUT
on the display. Use the
DOWN
/
UP
button to select the
Master Slave, Blackout
or
Last State
mode. Once the mode has
been selected, press the
ENTER
button to setup, to go back to the functions without any changes ,
press the
MENU
button again. Hold and press the
MENU
button for one second or wait for one
minute to exit the menu mode.
Display Setting
11C