ACME DIABOLO 500, User Manual

Page: 7 / 48

3. Control Panel
1. DISPLAY: To show the various menus and the selected function
2. Button:
MENU To enter into move backward or leave the menu
UP To go backward to move up in the menu
DOWN To go forward to move down in the menu
ENTER To perform the desired functions
3. DMX IN:
For DMX512 link, use 3-pin XLR cable to link the unit and controller (5-pin XLR cable is optional)
4. DMX OUT:
For DMX512 operation, use 3-pin XLR cable to link the next units (5-pin XLR cable is optional)
5. POWERCON IN: To connect to supply power
6. POWERCON OUT: To connect to the next fixture
7. FUSE(T 10A): Protects the unit from damage of over current
4. How To Set The Unit
4.1 Main Function
Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until
the required function is shown on the monitor. Select the function by pressing the ENTER button.
Use the UP/DOWN button to choose the submenu, press the ENTER button to store and
automatically return to the last menu. Press the MENU button or let the unit idle 30 seconds to exit
menu mode.
The main functions are shown below:
6C