ACME ColorTec 250 LED-CC60, User Manual

Page: 3 / 20

2A
1. Safety Instructions
y
Please keep this User Guide for future consultation. If you sell the fixture to another user, be
sure that they also receive this instruction booklet.
Cautions:
y
All fixtures are intact from the manufacturer, please operate follow up the user manual, artificial
fault are not under guarantee repair.
y
Unpack and check carefully there is no transportation damage before using the fixture.
y
Be sure that no ventilation slots are blocked, otherwise the fixture will be overheated.
y
Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the fixture.
y
Use in a dry location.
y
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
y
Maximum ambient temperature is 40
℃
. Don’t operate it where the temperature is higher than
this.
y
First run, there will be smoke or smells, and all disappearing a few minutes later.
y
Make sure there are no flammable materials close to the fixture while operating, as it is fire
hazard.
y
Look over power wires carefully, replace immediately if there is any damage.
y
Fixture surface temperature may reach up to 65
℃
. Don’t touch the housing bare-hand during its
operation.
y
Never run on for a long time lest shortening lifespan.
y
Do not operate in dirty and dusty environment, also cleaning fixtures regularly.
y
Do not allow children to operate the fixture.
y
Never turn on and off the fixture time after time.
Please read the instructions carefully which includes important
information about the installation, operation and maintenance.