6B
5. How to control the fixture
Three ways to set-up the DMX address
A. Universal DMX controller
B. Master/Slave operation
C. Easy controller (by CA-8)
A. Universal DMX controller
The fixture can be set the DMX address remotely by universal DMX controller. First, you
need to programming two scenes into a chase, and then link the fixtures to the universal
DMX controller. When you run the chase, all the fixtures of the chain will be set the series
DMX address automatically. If you use a controller with 5 pins DMX connector, you need to
use a 5 to 3 pin adapter. The fixture uses four channels. Please refer to the following
diagram to use your controller to activate the fixture.
7B
B. Master/Slave operation
The fixtures will allow you to link 16 fixtures together and operate without a controller. In
Master/Slave mode, the first fixture will control the others to give an automatic, sound
activated, synchronized light show. This function is good when you want an instant show.
The first unit it’s DMX input cable will have nothing connect it, and the other fixtures will be
set in slave mode automatically. Their DMX input cables connect the last fixture DMX output
cable (daisy chain). Any fixture can act as a Master or as a Slave
C. Easy Controller (by CA-8)
The easy remote control is used only in master/slave mode. There
is a terminator for connect the easy controller inside the fixture. By
connecting the cable into DMX IN waterproof cable entry gland to
the CA-8 terminator of the first fixture, you will find that the remote
control on the first fixture will control all the other fixtures for Stand
by, Function and Mode functions.
Blackout To blackout all the fixture
Function Strobe
1.Synchronous
strobe in white
color
2.The same color
chase
3.Different
color
strobe
9 Color select
White
Î
Red
Î
Blue
Î
Purple
Î
Orange
Î
Green
Î
Yellow
Î
Magenta
Î
Cyan
Color Chase
1. The same color
2. Different color
3. One light chase
4. Two lights chase
5. Four lights chase
Color Fade
1. Fast speed
2. Middle speed
3. Slow speed
Mode
Sound 1
(LED OFF)
Manual
(LED ON)
Sound 2
(LED slow blinking)
Auto
(LED fast
blinking)