P/T Feedback
To select
P/T Feedback
, press the
ENTER
button to show the
PAN/TILT FEEDBACK
on the
display. Use the
UP/DOWN
button to select
No
(Pan or tilt’s position will not feedback while out
of step) or
Yes
(Feedback while pan/tilt out of step), press the
ENTER
button to setup. Press the
MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
BL.O. P/T Moving
To select
BL.O. P/T Moving
, press the
ENTER
button to show the
BLACKOUT WHILE PAN/TILT
MOVING
on the display, use the
UP/DOWN
button to select
No
(normal while pan/tilt moving) or
Yes
(blackout while pan/tilt moving), press the
ENTER
button to setup. Press the
MENU
button
back to the last menu or let the unit idle one minute to exit menu mode.
White Balance
To select
White Balance
, press the
ENTER
button to show the
WHITE BALANCE
on the display, use
the
UP/DOWN
button to select
Red
,
Green
or
Blue
. Once selected, press the
ENTER
button to
confirm, and use the
UP/DOWN
button to adjust the value from
125
to
255
, press the
ENTER
button to setup. Press the
MENU
button back to the last menu or let the unit idle one minute to
exit menu mode.
Cooling Mode
To select
Cooling Mode
, press the
ENTER
button to show the
COOLING MODE
on the display.
Use the
UP/DOWN
button to select
Auto
(Normal) or
Low
(Low speed). Once selected, press the
ENTER
button to setup. Press the
MENU
button back to the last menu or let the unit idle one
minute to exit menu mode.
Dimmer Curve
To select
Dimmer Curve
, press the
ENTER
button to show the
DIMMER CURVE
on the display,
use the
UP/DOWN
button to select
Linear
,
Square Law
,
Inverse Squ.
or
S-curve
. Once selected,
press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the unit idle
one minute to exit menu mode.
8A
