ACME CB-16TC, User Manual

Page: 8 / 10

7-
DMX Address
Press the MENU button up to when the DMX Address is showing on the display. Press
ENTER button and the display will blink. Use DOWN and UP button to change the DMX512
address. Once the address has been selected, press the ENTER button to store. Back to
the main functions without any change press the MENU button (or wait for 8 seconds to exit
menu mode).
Tube Amount
Press the MENU button up to when the Tube Amount is showing on the display. Press
ENTER button and the display will blink. Use DOWN and UP button to change the tube
amount from 1 to 1000 .Once the amount has been selected, press the ENTER button to
store. Back to the main functions without any change press the MENU button (or wait for 8
seconds to exit menu mode).
Channel Mode
Press the MENU button up to when the Channel Mode is showing on the display. Press
ENTER button and the display will blink. Use DOWN and UP button to select the 1, 1MSL,
3, 4, 5, 6, 12, 24 ,48,50or LC 1 or LC 2 channels mode. Once selected, press the ENTER
button to store. Back to the main functions without any change press the MENU button or
12-
4.3 DMX Controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to
512 channel so that the units can receive DMX signal.
Press the MENU button up to when the DMX Address is showing on the display. Press
ENTER button and the display will blink. Use DOWN and UP button to change the DMX512
address. Once the address has been selected, press and keep ENTER button to store. To
go back to the functions without any change press the MENU button or wait for 8 seconds to
exit menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units:
Channel Mode Unit 1 Unit 2 Unit 3 Unit 4
1 channels 1 2 3 4
3 channels 1 4 7 10
4 channels 1 5 9 13
5 channels 1 6 11 16
6 channels 1 7 13 19
12 channels 1 13 25 37
24 channels 1 25 49 73
48 channels 1 49 97 145
50 channels 1 51 101 151
4.4 DMX 512 Configuration
Front View: