6B
11B
button and the display will blink. Use
DOWN
and
UP
button to change the DMX512 address.
Once the address has been selected, press and keep
ENTER
button pressed up to when
the display stops blinking or storing automatically 8 seconds later. To go back to the
functions without any change press the
MENU
button again. If you use please refer to the
following diagram to address your DMX512 channel for the first 4/2 units.
4 channels:
5. DMX512 Configuration
4 channels as a group, please refer to the DMX configuration of 4 channels to control the
other channels.
