A
3
upside-down from a ceiling or set on a flat level surface. To avoid internal damage to
the unit, never mount the unit on its side as illustrated above. Be sure this fixture is
kept at least 0.5m away from any flammable materials (decoration etc.). Always use
and install the supplied safety cable as a safety measure to prevent accidental damage
and/or injury in the event the clamp fails.
2. Product characteristics
CA-RS16 is a RDM/DMX signal shunt amplifier, dedicated to RDM/DMX signal
amplification, divided into 6 output. Each input and output interface is electrically
isolated.
Receiving standard DMX-512 signal /RDM signal
It can effectively buffer, amplify and divide DMX/RDM signals.
1 way signal input, 1 signal direct output, 6 independent electrical isolation signal
distribution output.
3/5pin XLR
Input is electrically isolated from output and output to withstand voltage
：＞
1000V
3. Front / rear panel
1
DMX
input:
3
/5pin XLR Line input DMX signal
