ACME CA-DC12S, User Manual, Page: 8 / 12

7-
value of the scene.
4.2 Faders (1-6/1-12)
These 6/12 faders provide direct control over the
corresponding dimmers, and thus the intensity for any
connected luminaries.
4.3 Flash Button (1-6/1-12)
At the MANUAL mode, these 6/12 FLASH button can make the
corresponding output channel to its maximum. At the SCENE
mode, if the position of the corresponding FADER at its bottom,
the scenes can be open or shut up by pressing the
corresponding FLASH button. If you press the FLASH button
when there is output in the FADER, then it will make the scenes output to its max.
4.4 Manual Mode
Press the SCENE /MANUAL button, when the LED indicator
light up, that means you have entered into the manual mode.
At this time these 6/12 faders provide direct control over
the corresponding dimmers, and you can adjust the
intensity for any connected luminaries.
4.5 Save Scenes
Press the SCENE /MANUAL button, when
the LED indicator light up that means you
can program 6/12 scenes and store them
into each corresponding button. Use the
fader to adjust the effect you want to store, and then hold the SCENE /MANUAL
button at the same time press the FLASH button (
1-6/1-12)
which you want to