8B
4.2.4 Set DMX port
Enter into the main menu by press MENU, then pressing the UP and DOWN to
choose the
Set DMX port
option and then press the ENTER to confirm your
selection. Then you can set the parameter of the each port by pressing UP
/DOWN and ENTER now.
1) DMX Input A B
Press ENTER button and select DMX IN Port A or DMX IN Port B. Then
press the button UP and DOWN to set the Port Status and Povtuniverse
from 001 to 256.
2) 1-8 DMX Input
You can enter to any of the DMX port 1-8 and set as below:
1, Port Status, DMX port status can be set as IN / OUT/ DIS;
2, As the DMX port set as Input status, then the Mode only can be set as
normal or backup.
3, Framerte/fs, adjust the speed of DMX output
4, Principal, adjust the value
5, Secondary, adjust the value
6, Resend, adjust or disable the value for universal of network
7, Display Mode, adjust the display mode
Normal mode
means it will send the data received from DMX IN port to the
universal of network regardless if there is any data in the universal of the
network.