8
Net-Net 4250 SD SSM Installation Guide
Version 1.0
SSM INSTALLATION
2.
Remove the right rack ear by unscrewing the three screws.
Note:
You do NOT need to remove the rack slide rails.
3.
Set the rack ears and screws aside
Opening the Chassis
Because the chassis lid is tightly secured to the chassis, a moderate amount of force
is needed to disengage the lid.
Caution
Before opening the Net-Net 4250 SD chassis, ground yourself
using an ESD wrist strap or other comparable grounding
system. Failure to do so could damage the SSM the Net-Net
4250 SD chassis.
1.
Unscrew the two countersunk screws on each side of the Net-Net 4250 SD that
hold the chassis cover to the chassis.
LEFT SIDE
RIGHT SIDE
2.
Set these screws aside.
