S G M 1 4 0 0 S e r i e s S m a r t M e t e r U s e r M a n u a l – S M E T S 2
19
Chapter 3 • Physical Components
Manual Operation Timeout
This setting defines the inactivity period for the manual-scroll mode. While
operating in manual-scroll mode, if no buttons are pressed, the display will revert
back to auto-scroll mode.
Backlight Timeout
This setting defines the period of time the backlight will remain lit following an
action which triggered the illumination. The following actions will trigger
backlight illumination:
• Pressing of the pushbuttons
• Optical Port activity
• Insertion of a WAN device
Display Item Configuration
The following display items may be configured as described in the following
sections.
OBIS Code
The DLMS Object Identification System code for the display item.
Interface Class
The DLMS Interface Class for the display item.
Number of Digits
This specifies the number of digits to display when leading zeros are enabled.
Default
10 seconds
Minimum
1 second
Maximum
60 seconds
Default
300 seconds (5 minutes)
Minimum
1 second
Maximum
300 seconds
Default
0
Minimum
0
Maximum
8
Summary of Contents for SGM1400 Series
