3. INSTALLATION
⚠
WARNING
*Always turn the Eurorack unit off and unplug the power cord before pluging
the Eurorack power cable.
*When attaching the Eurorack power cable, please be careful not to touch the
terminal part.
Connect to the Eurorack's system power supply (+ 12V) using the supplied
Eurorack power cable.
Connect the 16-pin connector to the Eurorack power connector. Connect the red
mark on the power cable so that it matches the pin on the (- 12 V) side of the
power connector.
Connect the 10 pin connector to this product side. Projection is provided for the
10-pin connector to prevent connecting the included power cable incorrectly in
the reverse direction. Please connect so that the projection of the power cable
and the indentation of this product side connector match.
Projection
Red line
To Module
To Power
Connector
GATE
CV
+5V
+12V
GND
GND
GND
-12V
FIG.1
：
Eurorack power cable
5