-5-
CONNECTORS
RJ45 Ethernet connector
The Ethernet port is auto-sensing (10 Base-T or 100 Base-Tx Half/Full
Duplex) and self-configuring (auto-MDI/MDIX) to allow connection to either a
crossover or straight-through connector. If it proves necessary to change the
Ethernet cable, the following table indicates the pinout of connector
J4
located on the PCB.
Pin
Signal name
Color
1
NC
2
Secondary PoE
(PoE models)
Brown
3
White Brown
4
Secondary PoE
(PoE models)
Blue
5
White Blue
6
TD- (output)
Orange
7
TD+ (output)
White Orange
8
RD- (input)
Green
9
RD+ (input)
White Green
Power supply connector 9 V – 50 V (J1)
Pin
Signal name
Color
1
- (GND)
Black
2
+V
Red
The product can handle power supply wires inversion.
SPECIFICATIONS
All dimensions are given in mm.
Power supply
External source
Wide DC power range from 9V to
50V, 4W max, 3.6W typical, polarity
inversion protection.
PoE source
(only for WLg-xROAD/NP model)
DC 36V to 55V (typical 48V)
4.7W max, 4W typical at 48V
Connector
2-wires cable
Ethernet interface
Type
One 10 BASE T/100 BASE Tx with
automatic negotiation (HDX/FDX,
10/100 Mbps), auto MDI/MDIX
Connectors
RJ45
Ethernet cable
Straight-through, 2m (6.4 ft)
RJ45 connector
T568B
