Documentation ref DTUS075 rev A0 06/18/20
-6-
The DIAG led stay off for around 40 seconds, until the device is fully ready to
use. Then the DIAG led turns blue.
Step 3 – ETHERNET CONNECTION
Connect the Ethernet cable (if it not connected in case of PoE or PPoE).
DEVICE CONFIGURATION
FACTORY SETTINGS:
IP address: 192.168.1.253
Radio Interface disable, preset for access point mode
SSID: acksys (broadcast)
No security (no WEP, no WAP, no WAP2, no MAC filter)
802.11n or ac mode, 5GHz band, auto-channel
WEB interface for device configuration:
IP address: 192.168.1.253
User name: root
Password: no password set as factory setting
Step 1
Verify that the IP address factory setting is compatible with your network, if
the IP address is not suitable for your network use Windows application
WaveManager
(available on web site
After the WaveManager installation run the application, select the
EmbedAir1000 device then click to “Setup”: now you can configure the IP
address or you can activate the DHCP client.
Step 2
Using your web browser open the WEB interface (IP address: 192.168.1.253)
and select the “SETUP” tab:
