6. Set the
Date
:
6.1 Press date
6.2 Enter the year (yyyy)
6.3 OK
6.4 Enter the month (mm)
6.5 OK
6.6 Enter the day (dd)
6.7 OK
7. Set the
Time
:
7.1 Press time
7.2 Enter the hour (0 tot 23)
7.3 OK
7.4 Enter the minutes
7.5 OK
19-11-2013
manual
7
Leave this menu by pressing the white arrow again. The
Options
menu appears again.
5. Choose
Validate
or
Adjust
as default start up measurement of the FlowFinder mk2®
Leave the Options menu by pressing the white ‘return’ arrow. The
Start Menu
appears. From the
Start Menu
the FlowFinder mk2® will
go into measuring mode by touching ‘validate’ or ‘adjust’.
Preferably, the FlowFinder mk2® is used with at least the
straight hood, certainly for most supply grilles. If space
is limited certainly exhaust can be measured without a
hood.
The straight hood is placed on top of the housing and is
hold in place by pulling the O-rings over the little black
knobs.
The same procedure can be used to mount the
600x600mm foldable hood.
For flows above
103CFM
it is assumed that the
600x600mm hood is used.
Avoid lifting the FlowFinder mk2® just using the hoods.
7. USING THE STRAIGHT HOOD 230X230X145
mm
AND
THE HOOD 600X600
mm
