WARRANTY
The ACI Room Series temperature sensors are covered by ACI’s Five (5) Year Limited Warranty, which is located in
the front of ACI’S SENSORS & TRANSMITTERS CATALOG or can be found on ACI’s website: www.workaci.com.
W.E.E.E. DIRECTIVE
At the end of their useful life the packaging and product should be disposed of via a suitable recycling
centre. Do not dispose of with household waste. Do not burn.
PRODUCT SPECIFICATIONS
Automation Components, Inc.
2305 Pleasant View Road | Middleton, WI 53562
Phone:
1-888-967-5224 |
Website:
workaci.com
Page 3
Version: 5.0
I0000345
WIRING INSTRUCTIONS
(Continued)
Note:
ACI’s stats are not two-way communicating. Communication jacks allow the user to query and
modify operating parameters of the local room terminal unit from the portable operator’s terminal
(laptop). This feature allows a technician to commission or service the controller via the sensor.
TEMPERATURE DISPLAY ADJUSTMENTS
The Temperature Display may be adjusted by adjusting the ZERO or OFFSET Potentiometer (P2) as shown on
the above diagram. Adjust (P2) until the LCD Display reading matches your controller if necessary.
SETPOINT CONTROL
Adjust slider at bottom of housing for set point control. Slide to right to increase set point temperature. Slide to
left to decrease temperature control.
One
1/16” Allen screws (2 qty) / 1/16” Hex Driver
Short Thermistor (Default); Field (Jumper) Selectable
“Dry Contact” Closure (Separate Input);
1.5 to 50 °C (35 to 122 °F) | -40 to 65 °C (-40 to 149 °F)
10 to 95% RH, non-condensing
Screw Terminal Blocks (Non-Polarity Sensitive)
16 (1.31 mm²) to 26 AWG (0.129 mm²)
0.5 Nm (Minimum); 0.6 Nm (Maximum)
“R” Enclosure:
ABS Plastic | Beige UL94-HB
A/AN (Type III):
10 KΩ nominal
+/- 0.2 °C (+/- 0.36 °F)
SENSOR NON-SPECIFIC INFORMATION
Number Temperature Sensing Points:
Housing Screw Size / Drive Size:
Override Option:
Operating | Storage Temperature Range:
Operating Humidity Range:
Connections / Wire Size:
Terminal Block Torque Rating:
Enclosure Material | Color:
Sensor Output @ 25 °C (77 °F):
Accuracy @ 0-70 °C (32 - 158 °F):