Q6 Operation And Maintenance Manual
86650-001-000 RB
Feb 22, 2019
20
3.7 Menu “4_OUT TEST”
During system installation and testing, it may be necessary to force relays and buzzers on and
off.
The Relay Testing feature allows the user to force the actuation of each relay. This function
forces an Actuate vs. De-actuate action, not an energized vs. non-energized action. Therefore
the user must be aware of these relays, which have been defined as normally energized or not
normally energized.
According to UL2075 standard for safety, the Q6 Endurance Test will automatically perform
6000 cycles of Relay/Buzzer On and Off operation at a rate of not more than 15 cpm.
Note: The 4mA (1VDC/2VDC) and 20mA (5VDC/10VDC) outputs are not available for Q6.
Up
F2
RETURN
TO MAIN MENU
MENU: TESTING:
1. TEST RELAY1
PRE NEXT ENTER
1. TEST RELAY1
OFF
ON OFF EXIT
F3
F3
F1
F2
1. TEST RELAY1
ON
ON OFF EXIT
Up
MENU: TESTING:
2. TEST RELAY2
PRE NEXT ENTER
2. TEST RELAY2
OFF
ON OFF EXIT
F3
F3
F1
F2
2. TEST RELAY2
ON
ON OFF EXIT
F1
Up
F2
MENU: TESTING:
3. TEST RELAY3
PRE NEXT ENTER
3. TEST RELAY3
OFF
ON OFF EXIT
F3
F3
F1
F2
3. TEST RELAY3
ON
ON OFF EXIT
Up
MENU: TESTING:
4. TEST BUZZER
PRE NEXT ENTER
4.TEST BUZZER
OFF
ON OFF EXIT
F3
F3
F1
F2
4.TEST BUZZER
ON
ON OFF EXIT
F1
F2
F1
Up
F2
MENU: TESTING:
5. TEST 4MA
PRE NEXT ENTER
5. TEST 4MA
OFF
ON OFF EXIT
F3
F3
F1
F2
5. TEST 4MA
ON
ON OFF EXIT
Up
MENU: TESTING:
6. TEST 20MA
PRE NEXT ENTER
6.TEST 20MA
OFF
ON OFF EXIT
F3
F3
F1
F2
6.TEST 20MA
ON
ON OFF EXIT
F1
F2
F1
MENU: TESTING:
EXIT TESTING
PRE NEXT ENTER
F2
F1
F2
F1
VDC OUTPUT CAN BE TESTED AT THE SAME TIME AS
TESTING 4/20MA:
WHEN OUTPUT 4MA, THE VDC OUTPUTS 1V OR 2V
WHEN OUTPUT 20MA THE VDC OUTPUTS 5V OR 10V
4mA and 20mA TEST ONLY IN Q5
