DSIM-SG
Installation Guide Rev G
Page 8 of 18
5. DSIM Controller Status LED Essentials
LED Blinking Pattern
Indications
Quick Blue / Red Blinks
DSIM controller to module syncing process -
Occurs when controller is installed into the DSIM
module.
Aligning process: in progress
Steady on Blue
In MGC Mode
Series of Blue Blinks
In AGC Mode
Steady on Purple
In TGC Mode
6. DSIM-SG Module Status LED Essentials
Operation Blinking Patterns for DSIM-SG Module
LED Blinking Pattern
Indications
Steady Repeating Blue Dashes
Manual Mode
Series of Blue Blinks
Pilot Channel Number
‐
See tables in section
10 at the end of the guide for blinking sequences
Single Blue Long Dash Between Series
of Blue Blinks
IRC Analog channel is set
2 Blue Long Dashes Between Series
of Blue Blinks
Digital channel is set
3 Blue Long Dashes Between Series
of Blue Blinks
TGC Mode
‐
The default cable length setting for
TGC mode is 27 dB of cable in front of the
amplifier
Quick Blue / Orange Blinks
Pilot paste in progress
‐
Wait
or Pilot channel not found or lost
