Safety
12
3
Safety
3.1
Basic Safety Instructions
The following safety instructions have fundamental importance for the use of the
workstation, and for its care and maintenance.
They must always be followed and are only stated centrally here.
Laser safety
If used properly, the workstation with an integrated laser marking device can be operated
in laser protection class 1.
The laser protection screen in the viewing window is matched to the characteristics of the
laser marking device. The specification corresponds at least to the required protection lev-
el and can be taken from the adhesive label on the window.
•
Only use the workstation and laser marking device in the combination supplied by the
manufacturer!
•
If the protection screen is damaged, the device must not be operated.
Summary of Contents for CLASSIC Fibre
