Maintenance and Repair
54
4.
Loosen the screw (4) holding the clamping ring of the scan unit and turn the scan unit
to the side or remove it.
Ensure that the connecting cable is not damaged or jammed.
5.
Remove the two front screws (5) of the center cover.
6.
Remove the center cover.
7.
Clean the ventilation slits in the covers with a dry or slightly damp cloth.
Do not use any solvent for cleaning them.
8.
Ensure that the covers are completely dry before reclosing the device.
9.
Reassemble the covers in the reverse order.
10. Check the electrical connections before bringing the device back into operation.
5
4
NOTICE
Slide the cover onto the device so its fits exactly.
Screw the fixing screws in hand tight.
