Setting the timing
To comply with the regulations of law in other countries, the timing of
the arrival time can be changed.
With the switch 2), the timing is set to 15 or 30 minutes.
The current timing is displayed in the switch. According to arrival, the
arrival time is set to the nearest half-hour on the basis of the actual
time of arrival. For example: in the case of arrival at 11:03 p.m., the
Parking disc is set to 11:30 p.m.
Germany – 30 Min., Denmark – 15 Min., Sweden – 30 Min.,
Finland – 30 Min., Switzerland – 30 Min., Austria – 15 Min
The device is currently only approved in Germany and Denmark.
Manual insertion of the Parking time
A) Wait until the Park mode is active.
B) Set the favored time by pressing the 5) key and 7) in 30 or 15
minutes intervals of the actual parking time.
Battery change
As soon as the Diode (6) in or of Park mode is flashing, the battery
must be replaced within a week.
Remove the Parking disc from the mounting bracket and change
the battery in the battery compartment (1) When inserting the new
battery, CR2450 doublecheck the correct polarity.
After changing the battery the clock will reset automatically. All time
settings must be made as described in advance.
7
EN
Summary of Contents for AD293
Page 1: ...Bedienungsanleitung ...
Page 18: ......