2013 © Fanciteck International Ltd. All rights reserved.
Page 15
tightening torque of 8 Nm.
Ensure that distance “A” is equal to distance “B”.
6.
Check handlebar stem clamp bolts to be sure they are
properly tightened, and handlebar can not move. The angle
of the handlebar can be adjusted. To adjust; loosen all of
the handlebar stem clamping bolts, and rotate the handlebar
to the desired angle.
7.
Be sure that the handlebar stays centered in the stem.
Retighten the bolts a LITTLE at a time being sure that the
gap between the stem cap and stem stays even. Repeat
tightening each bolt a little bit until handlebar is secure.
Caution!
A loose head stem could cause an unsafe
condition and risk injury to the rider. Check steering
tightness prior to riding by straddling the front wheel.
Try turning the handlebar. If you can turn it without
turning the front wheel, the stem is too loose. Re-align
the handlebar with the front wheel and re-tighten the
stem bolt.
Summary of Contents for Hugo 26
Page 1: ...Pedal Assisted Electric Bike Owner Manual for models WHISTLER Hugo 26 Sport ...
Page 2: ......
Page 43: ......
