Passive tone wiring.
The passive tone is wired directly into the pickup inputs via a 3 wire ribbon cable.
The centre wire is connected in to a Cold input ( 3 ) the outer wires are connected to the hot inputs.
(2 & 4 )
The other internal control (marked in red) is NOT USER AD-
JUSTABLE and under no circumstances should it be moved.
This will void your warranty and ACG will be in no way re-
sponsible for any consequential damaged caused if the user
adjusts this pot.
• Important: Make sure all threaded bushes for the pots are solidly grounded via screening or other
highly conductive material.( Although conductive paint is fine for screening it should not be used as
a method for grounding the pots of the pre-amp).
• The additional black wire should be attached to the cavity ground.
• The flexi-strips used to connect some of the pots while designed to be formed and bendable,try to
keep this to a minimum.
• Pre-amp will work on 9 volt or 18 volt power supply.
ACG EQ-02
Pre-amp installation instructions.
