ACG Cadillac ESCALADE eGC 2014 Owner'S Manual Download

Page: 6 / 61

Introduction

ABOUT THIS MANUAL

Thank you for purchasing your

Cadillac

ESCALADE

eGC

vehicle manufactured by

American Custom Golf Cars, Inc. (ACG)

Your vehicle is designed to operate exclusively on battery power.

It is a “

Zero Emission Vehicle

” (

ZEV

The

ACG

company objective includes customer safety and product satisfaction.

This “

Owner’s Manual

” is designed to acquaint you with the proper and safe

operation of your

ACG

vehicle.

Please take the time to read and understand the manual before operating your
vehicle.

Maintenance schedules and general care instructions are included in the Operation
and Maintenance section.

This manual is applicable only to the following

ACG

models:

2014

Cadillac

ESCALADE

eGC

If any questions arise after reading the manual, please contact ACG Customer
Service at

(909) 597-2885.

Please have your Vehicle Identification Number (VIN) and date of purchase
information available.

NOTE:

All information and specifications in this “

Owner’s Manual

” are current at the time

of printing. However, due to ACG’s policy of continuous product improvement, we
reserve the right to make changes, at any time, without written notice or obligation.

Page

Summary of Contents for Cadillac ESCALADE eGC 2014






























































Search results

Summary of Contents for Cadillac ESCALADE eGC 2014

Reviews:

Related manuals for Cadillac ESCALADE eGC 2014

Brands by name

Popular brands

ACG Cadillac ESCALADE eGC 2014, Owner'S Manual

Search results

Summary of Contents for Cadillac ESCALADE eGC 2014

Reviews:

Related manuals for Cadillac ESCALADE eGC 2014

Brands by name

Popular brands