ACG 39 Roadster eGC Owner'S Manual Download Page 45

Page: 45 / 52

Page 45

Additional Battery Service Warnings & Cautions

WARNING!

Always wear safety glasses or approved eye protection when

servicing the vehicle.

Wear a full-face shield and gloves when working with or around

batteries and electrical connectors.

Always use insulated tools when working with or near batteries.

WARNING!

Battery fluid is a corrosive acid solution and can burn or blind you.

Do not allow battery fluid to contact eyes, skin or clothing. If acid

splashes in eyes or on the skin, flush the area immediately with large
quantities of water.

Battery gas is flammable and explosive. Keep flame or sparks away

from the battery or any other booster source.

Do not allow battery cable clamps to touch each other.

Battery posts, terminals and related accessories contain lead and
lead compounds. Wash your hands after handling.

CAUTION!

Battery acid from cleaning batteries can damage vehicle, driveway or
garage floor.

WARNING!

The

“

Key Switch

” will disable the vehicle by disconnecting the battery

pack from the motor. It does not disable the battery pack.

HIGH VOLTAGE will be present at the battery terminals.

HIGH BATTERY VOLTAGE IS ALWAYS PRESENT.

DO NOT TOUCH THE BATTERY TERMINALS.

Summary of Contents for 39 Roadster eGC





















































Search results

Summary of Contents for 39 Roadster eGC

Reviews:

Related manuals for 39 Roadster eGC

Brands by name

Popular brands

ACG 39 Roadster eGC, Owner'S Manual

Search results

Summary of Contents for 39 Roadster eGC

Reviews:

Related manuals for 39 Roadster eGC

Brands by name

Popular brands