ACG 39 Roadster eGC 2012 Owner'S Manual Download | Manualshive

Page: 56 / 60

background image

Cleaning

CARE AND CLEANING

Cleaning the Windshield

Please be extremely careful when cleaning the Windshield on your

39 Roadster

eGC

as it is made from acrylic plastic.

ACG

recommends using

Windshield Washer Fluid to

remove normal

dust and dirt. A liquid household glass cleaner can also be used.

Do not use abrasive cleaners on the windshield, as they will cause
scratches.

CAUTION!

Be very careful when cleaning the acrylic glazing as it can be scratched
or damaged. Do not use a cleaner with an abrasive, a combination
cleaner and wax or any solvent that contains ethyl or methyl alcohol.
Do not use products containing ammonia, soaps, or abrasives.
Never use gasoline or any cleaning solvent. These products scratch or
destroy the surface of the windows.
To remove oil, grease or road tar use isopropyl alcohol and then wash
the windows with water.
Dry gently with a soft cloth or chamois.

Cleaning the Exterior

The best way to preserve your vehicle’s finish is to wash the vehicle regularly.
Mild liquid detergents (no strong soaps or chemical detergents), can be used.
Rinse promptly after cleaning. Dry the finish with a soft, clean chamois or towel to
avoid surface scratches and water spotting.

NOTE:

To avoid spotting, do not wash your vehicle in direct sunlight.

Copyright © 2009-2011 American Custom Golf Cars, Inc.

Page

56

«
...
54
55
56
57
58
...
»

Summary of Contents for 39 Roadster eGC 2012





























































Reviews:

No comments

Related manuals for 39 Roadster eGC 2012

Brand: Columbia Pages: 34

Toro Reelmaster 5010 Series

Brand: Tektite Pages: 19

Brand: Motrec Pages: 59

Brand: Cart-Tek Pages: 18

Brand: Cart-Tek Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands