enter and exit the Sub-Menu. Press the UP and DOWN DIRECTION BUTTONS to
navigate the Sub-Menu.
1.
Configuration
1.
Press the RIGHT DIRECTION BUTTON or ENTER to select the Sub-Menu.
2.
Press the UP and DOWN DIRECTION BUTTONS to select “2.x,” “3.x,” “4.x,”
“5.x,” or “6.x.”
3.
Press the ENTER BUTTON to confirm it.
4.
Subsequent menus will appear to allow you to select the appropriate surround
and subwoofer configuration for your speakers.
5.
Press the RETURN BUTTON to exit.
2.
Test tone
1.
Press the RIGHT DIRECTION BUTTON or ENTER to select the Sub-Menu.
2.
Your speaker configuration will appear for you to select Size, Trim, and Delay
settings for each channel.
3.
Press the RETURN BUTTON to exit.
3.
Post Process - Press the LEFT and RIGHT DIRECTION BUTTONS or ENTER to enter
and exit the Sub-Menu. Press the UP and DOWN DIRECTION BUTTONS to navigate
the Sub-Menu.
1.
EQ – select from available equalization settings
1.
Press the RIGHT DIRECTION BUTTON or ENTER to select the Sub-Menu.
2.
Press the UP and DOWN DIRECTION BUTTONS to select “Off,” “Rock,”
“Pop,” “Live,” or “Dance.”
3.
Press the ENTER BUTTON to confirm it.
2.
UpMix
1.
Press the RIGHT DIRECTION BUTTON or ENTER to select the Sub-Menu.
2.
Press the UP and DOWN DIRECTION BUTTONS to select “Off,” or “NEO6.”
3.
Press the ENTER BUTTON to confirm it.
4.
4.
System Information – displays the current software version and the unit's MAC address.
Storage Information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you suspect that something is
wrong with the unit, check the list below for sometimes the troubles lie within another component.
Remember to try inspecting other components and electrical appliances in use. If the trouble cannot be
rectified even after exercising the steps listed below, contact Acesonic at +1-626-820-0645 to inquire
about repairs.
Reset to factory settings
Resetting the unit to factory defaults will likely solve more than 90% of problems encountered.
Power the unit down then back up by unplugging and plugging the power cord back (not the
Power Button or the remote).
Restore the factory settings through the Preferences Menu.
◦
General Setting
◦
System
