System Setup
Audio Setup
SPDIF OUT: AUDIO OUTPUT SETTING
¾
OFF
: Analog audio output through the jacks on back panel (FL, FR, RL, RR, Center, Sub-Woofer). If Karaoke is
precedence, you must select analog audio.
¾
SPDIF/RAW
: Through the Coaxial/Optical jack to output Dolby 5.1CH digital or DTS digital audio.
¾
SPDIF/PCM
: Through the Coaxial/Optical jack to output PCM digital audio.
OP MODE :
¾
LINE OUT
: Line out mode, with digital dialog normalization.
DEFAULT
¾
RF REMOD
: RF re-modulation mode, with heavy compression and digital dialog normalization.
DUAL MONO
This is SIMILAR TO Multiplex television and can work only for the Disc designed for DUAL MONO program.
¾
STEREO:
Output proper channels through both right and left speakers.
¾
R-MONO
: Output the channel of the right side through both right and left speakers.
¾
L-MONO:
Output the channel of the left side through both right and left speakers.
¾
MIX-MONO:
Outputs through both right and left speakers by mixing up two channels.
COMPRESSION: SOUND OUPUT REINFORCEMENT
This is a function to adjust the sound dynamic range.
PRO LOGIC :
There are three modes of OFF/ON/Auto.
LPCM OUPUT:
If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling rate. The higher sampling rate, the better sound quality.
¾
LPCM 48K
: Playback a disc recorded at the sampling rate of 48kHz.
¾
LPCM 96K:
Playback a disc recorded at the sampling rate of 96kHz.
CDDA RIP TYPE
¾
WAV:
Audio file shall be encoded at WAV format into USB.
¾
MP3:
Audio file shall be encoded at MP3 format into USB.
CDDA RIP MODE
¾
TRACK:
Audio file shall be ripped by one TRACK into USB
¾
DISC:
All audio files in the DISC shall be ripped into USB in order.
MP3 ENCODING:
When you encode the Audio file from Audio CD, you may need to adjust MP3 sampling late. The higher rate, the better
sound quality.
¾
96K
: Audio file will be encoded at the sampling rate of 96K.
¾
128K:
Audio file will be encoded at the sampling rate of 128K.
Video Setup
VIDEO OUT PUT
¾
S-VIDEO:
You have to select S-Video mode to connect with TV via S-Video or Composite port.
¾
YPbPr:
You have to select YPbPr mode to connect with TV via Component or Composite port.
¾
RGB:
You have to select RGB mode to connect with Monitor via VGA or Composite port.
22
www.acesonic.com
