1. MICROPHONE MASTER VOL control - Adjusts
the overall volume output for all three microphone
channels
2. MUTE ON/OFF buttons
3. POWER ON/OFF button
4. DYNAMIC SOUND ON/OFF buttons
5. MICROPHONE ECHO control - Adjusts the echo
effect.
6. MICROPHONE DELAY control - Adjusts the echo
delay time.
7. MICROPHONE BASS control - Adjusts the low
audio frequency setting.
8. MICROPHONE TREBLE control - Adjusts the
audio high frequency setting.
9. MIC1 & MIC2 INPUT jacks - 1/4” inputs for
microphones.
10. INPUT SELECTION buttons - Sets the input
source selection to manual mode. Switch input
from DVD, TAPE, VCD,or AUX.
11. MUSIC BASS control - Adjusts the music’s low
frequency setting.
12. MUSIC TREBLE control - Adjusts the music’s
high frequency setting.
13. MUSIC BALANCE control - Distributes
music the left and right stereo channels.
14. MUSIC LOUDNESS ON/OFF buttons
15. AUX VIDEO INPUTS
16. AUX AUDIO INPUTS
17. MUSIC MASTER VOL control
18. INFORMATION DISPLAY WINDOW
Front Panel Descriptions
2
First Things First
Before operating your mixing amplifier, there are a few
things you should do and know:
• Make sure your local power outlet supplies the
correct voltage for the AC adapter. Only use the
adapters supplied with the system.
•
Do not run the outputs of any amplifier channel back
into another channel input. Do not parallel or series
connect amplifier.
•
Before connecting your speakers to any amplifier,
check your speaker’s specifications.
• Turn off your audio system during set-up and turn
down volume.
Before connecting the power cord of your AM-145 to
a wall outlet,
BE SURE TO VERIFY THAT THE VOLTAGE
SELECT SWITCH ON THE BACK OF THE
UNIT IS SET CORRECTLY!
Voltage Selector
