6.
Keyboard lock function.
To avoid undesired manipulation, it is possible to block
access to the equipment so that it is not possible to modify any adjustment by pushing
either of the two keys or turning the thermostat control. To do this, press the StandBy
key (1), continuously for 10 seconds. The keyboard locking will be confirmed by rapid
flashing of the associated LED (2). To unlock the device, just press the StandBy key
(1) again for 10 seconds. The flashing LED will indicate that access has been
unlocked.
Note:
If there is any disturbance, the overheating disconnection system will
automatically disconnect the applianceand it will stop heating. To reset it, follow these
instructions:
- Stop the appliance by pressing the StandBy key (Status LED red).
- Disconnect the equipment from the mains.
- Let the appliance cool for about 30 minutes.
- Make sure that there is no obstruction to free air flow.
- Press the StandBy key again (status LED green or amber).
- If, after these actions, the appliance does not work normally, please contact
our Official Technical Service network.
ACESOL
heat emitters comprise advanced technology providing greater
safety and lower consumption. Ergonomically designed, the controls are located on
the upper part, avoiding forced body postures and enabling them to be handled by
people with mobility or sight problems.
Highly sensitive manual thermostat
for easy and complication-free control. This
provides greater precision in combination with its advanced PID control. The
temperature you want for the room will be adjusted by simply turning the emitter
control wheel.
PID electronics
. Integrated control system with an electronic thermostat*. It uses a
management algorithm to manage the consumption of emitters in terms of the data
received, adjusting consumption based on the requirements of your home. As
opposed to other systems using a relay, it offers a practically endless number of
possible movements.
Fireproof electronic casings
, with high quality finishing, built out of ABS.V0.* (self-
extinguishing) material providing high mechanical performance, free from halogen
components and with anti-UV protection. They are designed in smooth and
harmonious shapes for their perfect integration in the aluminium body.
DSS® (Double Security System)
, new and exclusive to ACESOL emitters,
managing the internal conditions of the apparatus. It includes the combination of a
thermostat with PTCR and an inverse valve, to cancel apparatus operating (as in
cases of overheating due to covering), that provides maximum safety.
Very high heat transfer SolAzul thermoconductor fluid
, developed for IAT,
combining exceptional stability, high specific heat, low viscosity, excellent fluidity
(even at low temperatures) that allows maximum heat contents per volume unit for
efficient operating*.
English
EN
7. Characteristics and Components.
Classic
Classic
ACESOL
-
Installation manual - Instructions for use
15
Summary of Contents for Classic Series
Page 2: ......
Page 31: ...Fig 8 Fig 9 E L C A L O R A Z U L Classic mode 200 mm 200 mm 1 2 3 4 5...
Page 32: ......
