background image

14

Stamp

User can overlap the channel name and time stamp on video

.

Pic 2-13 Character overlay

Tick off camera name, time stamp; click Setting button, and then user can use cursor

to drag the camera name and time stamp in random positions. Please refer to below Figures
User can also setup all channels with same parameters.
Click “Default” button to resort default setting; click “Apply” button to save the setting; click
“Exit” button to exit current interface

2.4.3.4 Recycle record

Tick off recycle record to enable the recycle record function. It will cover the earlier

recorded files and keep recoding when HDD is full; if disenabled, it will stop recording when
HDD is full. Note: general the image quality, frame rate and resolution parameters setting
higher, the more take up disk space.

Click “Default” button to resort default setting; click “Apply” button to save the setting;

click “Exit” button to exit current interface.

2.4.4 Schedule configuration

Schedule configuration includes two sub menus: schedule

motion and sensor.

2.4.4.1 Schedule

The volume means the seven days of a week from Monday to Sunday; the row

means 24 hours of a day. Click the grid to do relevant setup. Blue means checked area,
gray means unchecked area.

Pic 2-14 Schedule

Copy

User can apply the schedule setting of certain channel to other or all channels.

Just only select channel and click “Copy” button.

Summary of Contents for AS-0410



























Reviews: